![]() The specification says that you can expect around 2 hours30 minutes constant use at 50% power this seems like a very realistic, if slightly pessimistic, claim from our experience.Lume Six Cirra High Impact Sports Bra ($120)Īs a runner, I gravitate towards high-end and supportive bras with the tendency to hop from one brand to another in search of the perfect sports bra. However, it should be noted that a lot of this time we were using the light in optical slave mode and not in a continuous mode. Battery Life:įrom a full charge we have been getting over 5 hours ‘use’ from a single charge. LED lights traditionally have a very blue look and even though this light is in the hugely useful daylight balanced range around 5600K, there is also a magnetic warming gel provided with this light. However, there is a huge amount of creative freedom that can be gained by just having a couple of these placed in the background of a scene. The down side to this is that the light has to be realties close to the subject, particularly when the ambient light levels are relatively high. The Lume Cube comes into it’s own here as a versatile and flexible light that can be placed in many locations that a larger light would simply not fit. You can adjust their power input from the app as well as changing the mode of each light to be constant, flash or strobe. Using the free Lume-X app, you can control the power of any number of Lume Cubes that you have connected. This is a real game-changer if you’re into mobile photography. One of the other amazing features of this light is that it can be used as an off camera flash for mobile phone photography. I think that these mould be of great use to wedding photographers as they are easy to carry around, robust, waterproof and don’t require extra batteries. ![]() For example, when shooting outdoors ay night, they could be placed behind objects, in the foliage, in trees etc to add get swathes of extra light to add interest and drama to the background of flash lit images. There are also a huge number of applications where you can take advantage of the unique qualities of these lights. This is not great problem to us as we usually take numerous frames and focus stack the final image to ensure that we have front-to-back sharpness in the final image. One other thing to note was that we had to use a wider than normal aperture to get sufficient light to register in the image. We’ll be getting in touch with Lume Cube about this to see if this is by design, or if it’s just the unit that we have. When using strobes, we generally shoot at 1/200 second to ensure that there is minimal ambient light getting into the shot and that all the light in the image is provided from solely the strobes. One issue that we did come across whilst using this method of shooting products with the Lume Cube 2, is that the slave does not appear to operate at shutter speeds above 1/50 second. On the rear on the light is a rubber cover that provides access to the micro-USB connector which is used to charge the Lume Cube 2.0. The optical slave is flush-mounted to the surface of the unit in-between the 2 control buttons, this also doubles as an indicator for charging and bluetooth connection indication. They are raised from the body which makes them very easy to locate, even in the dark and the have a very positive switching action. There are two switches mounted on the top surface and both are solid to the touch. It’s the small touches like the added grips all around the body that prove there has been a great deal of thought during the design process. These features make for extra positive handling of the light and give a real feeling of robustness. There is a clear lens in front of the LED lamp that offer great protection whilst the robust plastic bezel controls the spread of light to 80 degrees. These extend around all of the corners and are also present on the rear edge of the front bezel. There are suitably deep, grooved areas on each of the sides. The body is from machined aluminium and there is a real feeling of solidity and robustness to the unit. This is definitely not a cheap Chinese copy of anything and you can feel that a great deal of thought has been put into the design and the manufacture of this little power-house. You just know that it’s going to be able to take a serious amount of abuse. It has a very solid feel in the hand and there’s definitely nothing flimsy about this unit. From the first time that you get your hands on this diminutive light you know it’s seriously well made.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |